__________________________________________________________________________

  This is the Info-ZIP file INSTALL (for UnZip), last updated 01 Aug 2010.
__________________________________________________________________________

  Yes, this is a rather long file, but don't be intimidated:  much of its
  length is due to coverage of multiple operating systems and of optional
  customization features, large portions of which may be skipped.

__________________________________________________________________________



To compile UnZip, UnZipSFX and/or fUnZip (quick-start instructions):
========================================

(1) Unpack everything into a work directory somewhere, and make sure you're
    in the main UnZip directory (the one with this file in it).
    (See note below (*) concerning line termination format used in the source
    distribution.)

(2) Copy the appropriate makefile into the current directory, except under
    OS/2.

(3) Run your "make" utility on the makefile (e.g., "nmake -f makefile.msc").

(4) Try out your new UnZip the way you would any new utility:  read the
    docs first.

    For VMS, see the Install section below or [.vms]INSTALL.VMS for details.

    For DOS and other OSes without explicit timezone support (i.e., everybody
    but Unix, VMS, Windows 95 and later), make sure the "TZ" environment variable
    is set to a valid and reasonable value; see your compiler docs for details.

(*) The UnZip sources as well as other Info-ZIP source archives are packaged
    in Unix format. All text files use single LF (Ascii 0x0a) characters as
    line terminators.  On systems that use different conventions for plain text
    files (e.g.:DOS,Win9x,WinNT,OS/2 -> combined CR+LF; MacOS -> single CR),
    some utilities (editors, compilers, etc.) may not accept source files
    with LF line terminators.
    For these systems, we recommend using Info-ZIP's UnZip utility for
    extraction of our distribution archives, applying the command option
    "-a" (= translate text files to native format) in the extraction command.
    In case this procedure is not applicable, an appropiate third-party
    conversion utility may be used to achieve the desired line termination
    style (examples: "flip", available for Unix, DOS, OS/2; or "tr" on Unix).


To compile UnZip, UnZipSFX and/or fUnZip (detailed instructions):
========================================

(1) Unpack *.c and *.h (the actual source files), preserving the directory
    structure (e.g., ./unix/unix.c).  The sole exception is TOPS-20, where
    tops20/* should be unpacked into the current directory, but TOPS-20
    is no longer fully supported anyway.

    As of UnZip 5.41, full decryption support has been integrated in the
    UnZip source distribution.  If you wish to compile binaries without
    decryption support, you must define the preprocessor flag NO_CRYPT.
    For many environments, you may add this flag to the custom compilation
    flags supplied by the "make" macro (or environment variable) LOCAL_UNZIP.
    For more details, see the "make" procedures and accompanied documentation
    for your particular target OS.

    As of UnZip 5.53, support for the bzip2 compression algorithm has been
    added to UnZip. However, this support requires the original sources of
    the bzip2 compression library which have to be acquired separately;
    see "http://www.bzip.org/" for further reference.


(2) Choose the appropriate makefile based on the description in the Contents
    file for your OS.  (There's only one for Unix or OS/2, but MS-DOS and
    several other OSes have several, depending on the compiler).  On many
    systems, the makefile can be used where it resides, using make's "-f"
    option.  For example, "make -f unix/Makefile".  On other systems, you may
    need to copy it into the current directory (and rename it, if necessary
    or desired).  On OS/2, os2\makefile.os2 expects to remain in the os2
    subdirectory, so invoke it using a command like, for example:
        nmake -f os2\makefile.os2 gcc

    Don't be afraid to read the makefile!  Many options will be explained only
    in the comments therein.  The defaults may not quite suit your situation.
    When making changes, remember that some "make" utilities expect tab
    characters as part of the makefile syntax.  Failure with cryptic error
    messages may result if your editor (quietly) replaces those tabs with
    spaces.

    Special point of confusion:  some non-MSDOS makefiles contain MS-DOS
    targets (useful for cross-compilations). An example is the OS/2 makefile,
    os2\makefile.os2, that contains the gccdos target for DOS emx+gcc and
    some more DOS related targets for Watcom C and MSC. But since UnZip
    version 5.3, the msdos subdirectory contains makefiles for all supported
    DOS compilers.  (The old djgpp, djgpp1 and gcc_dos targets in
    unix/Makefile have been removed in UnZip 5.3; use msdos/makefile.dj*
    instead.)


(3) If you want a non-standard edition of UnZip, define one or more of the
    optional C macros listed below, either by adding them to the LOCAL_UNZIP
    "make" macro (or environment variable), or by editing your makefile as
    appropriate.  The syntax differs from compiler to compiler, but a C
    macro named MACRO_NAME is commonly defined using syntax like
    "-DMACRO_NAME" (or "-DMACRO_NAME=value").  Note that, like all the UnZip
    source code, the C macros used and/or supported may change from one UnZip
    release to another.  Note also that very short command lines in MS-DOS
    (128 characters) may place severe limits on how many of these can be
    used; if need be, the definitions can be placed at the top of unzip.h
    instead (it is included in all source files).  For example,
    "#define MACRO_NAME" (or "#define MACRO_NAME value"), one macro per line.

      DOSWILD   (MS-DOS only)
        Treat trailing "*.*" like Unix "*" (i.e., matches anything); treat
        trailing "*." as match for files without a dot (i.e., matches any-
        thing, as long as no dots in name).  Special treatment only occurs
        if patterns are at end of arguments; i.e., "a*.*" matches all files
        starting with "a", but "*.*c" matches all files ending in "c" *only*
        if they have a dot somewhere before the "c".  [The default method of
        specifying files without a dot would be "* -x *.*", making use of
        UnZip's exclude-files option.]  The matching is actually the same as
        Unix, if you assume that undotted filenames really have an invisible
        dot at the end, which is how DOS and related systems treat filenames
        in general.  All other regular expressions (including "?" and
        "[range_of_chars]") retain their Unix-like behavior.

      WILD_STOP_AT_DIR   (incompatible with WINDLL!)
        Enables an additional option "-W".  When this qualifier is specified,
        the pattern matching routine is modified so that both '?' (single-char
        wildcard) and '*' (multi-char wildcard) do not match the directory
        separator character '/'. Examples:
          "*.c" matches "foo.c" but not "mydir/foo.c"
          "*/*.c" matches "bar/foo.c" but not "baz/bar/foo.c"
          "??*/*" matches "ab/foo" and "abc/foo" but not "a/foo" or "a/b/foo"
        To enable matching across directory separator chars, two consecutive
        multi-char wildcards "**" should be specified.
        This modified behaviour is equivalent to the pattern matching style
        used by the shells of some of UnZip's supported target OSs (one
        example is Acorn RISC OS).

      VMSWILD   (VMS only)
        Use parentheses rather than brackets to delimit sets (ranges), and
        use '%' instead of '?' as the single-character wildcard for internal
        filename matching.  (External matching of zipfile names always uses
        the standard VMS wildcard facilities; character sets are disallowed.)

      VMSCLI   (VMS only)
        Use VMS-style "slash options" (/FOOBAR) instead of the default Unix-
        style hyphenated options (-f).  This capability does not affect options
        stored in environment variables (UNZIP_OPTS or ZIPINFO_OPTS); those use
        the Unix style regardless.  Beginning with UnZip 5.32, the supplied
        VMS build methods generate both VMS-style and default "UNIX-style"
        executables; you should NOT add VMSCLI to the custom options.

      CHECK_VERSIONS   (VMS only)
        UnZip "extra fields" are used to store VMS (RMS) filesystem info,
        and the format of this information may differ in various versions
        of VMS.  Defining this option will enable UnZip warnings when the
        stored extra-field VMS version(s) do(es) not match the version of
        VMS currently being used.  This is a common occurrence in zipfiles
        received from other sites, but since the format of the filesystem
        does not seem to have changed in years (including on Alpha and
        IA64 systems), the warnings are not enabled by default.

      RETURN_CODES   (VMS only)
        VMS interprets return codes according to a rigid set of guidelines,
        which means it misinterprets normal UnZip return codes as all sorts
        of really nasty errors.  Therefore VMS UnZip returns an alternate set
        of return codes; since these may be difficult to interpret, define
        RETURN_CODES for human-readable explanations.

      VMS_TEXT_CONV   (everybody except VMS)
        VMS Stream_LF-format text files archived with the "-V" option
        (/VMS), but NOT with -VV (/VMS=ALL), should be fine when extracted
        on other systems.  Stream_LF-files archived with -VV should be
        readable as well, but they may get some junk appended.
        Text files with other formats (like the default VFC, with its
        embedded byte counts) may be only semi-readable at best when
        extracted on other systems.  Defining this option enables UnZip's
        -aa option to detect and convert VMS VFC-record text files into
        native text format.  Non-VMS UnZips now use a rudimentary VMS extra
        field analyser to reliably determine such text files. (Earlier
        versions of UnZip applied some heuristics instead.)
        Therefore this option is now enabled by default for the main program
        (but not the SFX stub), because it can be extremely useful on those
        rare occasions when a VMS text file must be extracted as normal text.

      USE_DJGPP_ENV   (MS-DOS DJGPP 2.0x only)
        Regular DJGPP v2.0x compiled programs which use ENVIRONMENT are
        able to read from the file "djgpp.env" as well as those set in the
        environment.  This adds about 1KB to the size of the executable.
        This option is disabled by default in Info-ZIP source. If you are
        able to use "djgpp.env" and don't like to clutter the environment
        with many special purpose variables, you may want to compile with
        this option set.

      USE_DJGPP_GLOB  (MS-DOS DJGPP 2.0x only)
        If you like to get UnZip binaries that handle command line arguments
        similar to Unix tools which are run in an Unix shell, you might want
        to set this compilation option.  This option enables the support for
        globbing command line arguments containing wildcards that is built
        into the DJGPP startup code.  When using a binary compiled with this
        option, you may have to enclose wildcard arguments in double quotes
        to get them passed to the program unmodified.  Enabling this option
        is not recommended, because it results in Info-Zip binaries that do
        not behave as expected for MS-DOS programs.

      USE_VFAT  (MS-DOS only, for using same executable under DOS and Win95/NT)
        djgpp 2.x and emx/gcc+RSX 5.1 can detect when they are running under a
        Win32 DOS box and will accordingly enable long-filename support.  For
        now only djgpp 2.x and emx/gcc with RSX 5.1 or later have this feature
        (and it is defined by default in msdos/makefile.dj2 and makefile.emx),
        but if/when other compilers build in similar support, define this
        macro to enable its use.  See also msdos/doscfg.h.  [Note that djgpp
        2.0's LFN support is flaky; users should upgrade to 2.01 or later.]

      NO_W32TIMES_IZFIX (Win32 including WinDLL, and WinCE)
        By specifying this option, you can disable Info-ZIP's special timestamp
        adjustment to get stable time stamps on NTFS disks that do not change
        depending on the current time being normal vs. daylight saving time.
        When this option is set, UnZip behaves exactly like other programs;
        file timestamps on NTFS partitions are created so that their >current<
        local time representation displayed by directory listings (cmd.exe
        "dir" command or Windows Explorer listings) is the same as shown by
        UnZip's listing. But the actual UTC timestamp values stored in the
        NTFS file attributes vary depending on whether extraction is done
        at summer or winter time.
        This option is not recommended because it sacrifies the timestamp
        comparison checks when extracting or modifying archives in "update
        only newer" mode.
        However, for environments where consistency of >displayed< dates
        of files extracted to NTFS vs. FAT disks is considered more important
        than correctly working update/freshen tasks of Zip&UnZip, this
        option may be used.
        >> DO NOT DISTRIBUTE OR PUBLISH executables that were compiled with
        this option! <<

      NOTIMESTAMP
        This option disables the -T option, which basically does exactly what
        Zip's -go options do (i.e., set the timestamp of the zipfile to that of
        the newest file in the archive without rewriting the archive).  Unlike
        Zip, however, UnZip supports wildcard specifications for the archive
        name; for example, "unzip -T *.zip" will set the dates of all zipfiles
        in the current directory.  (UnZip's option is also much faster.)

      DATE_FORMAT=DF_DMY or DF_MDY or DF_YMD
        This option controls the order in which date components are printed
        in non-ZipInfo-mode listings:  day-month-year or month-day-year or
        year-month-day.
        For DOS, FlexOS, OS2, Theos and Win32, the format is automatically
        obtained from the operating system; most others default to DF_MDY.

      DATE_SEPCHAR='-' or '.' or '/' etc.
        This option controls the character that separates the date components
        shown in (non-ZipInfo-mode) listings.  The Win32 port obtains the
        separator automatically from the operating system's locale settings;
        all others default to '-'.

      ACORN_FTYPE_NFS  (needs support for long filenames with embedded commas)
        This option enables a -F option that instructs UnZip to interpret the
        filetype information extracted from Acorn RiscOS extra field blocks.
        The filetype IDs are translated into "NFS filetype extensions" and
        appended to the names of the extracted files. This feature facilitates
        maintenance of Unix-based NFS volumes that are exported to Acorn RiscOS
        systems.

      QLZIP  (Unix only)
        Add some support for QDOS extra fields. This option enables Unix
        UnZip to append "datalen info" to QDOS exec type files in the same
        format as used by QDOS cross-compilers on Unix or the qltools v2.2(+).

      UNIXBACKUP   (default on OS/2, Unix, Win32)
        This option enables a -B option that instructs UnZip to rename files
        that would normally be overwritten.  The renamed files are given a
        tilde suffix and a unique sequence number (`~#####').  Note that
        previously renamed files may be overwritten without notice, even
        if the -n option is given.
        On target ports where UNIXBACKUP is enabled by default, the negated
        option NO_UNIXBACKUP may be used to disable this feature.

      OS2_EAS
        List the sizes of OS/2 EAs and ACLs for each file as two extra columns
        in "unzip -l" output.  This is primarily useful for OS/2 systems, but
        because zipfiles are portable, OS2_EAS can be defined for any system.
        (May be extended someday to show sizes of Mac resource forks, RISCOS
        and VMS file info, etc.)

      DELETE_IF_FULL  (anybody with unlink() function)
        If a write error is encountered (most likely due to a full disk),
        enabling this option will cause the incomplete file to be deleted
        instead of closed normally.  This is particularly useful for the
        Windows CE port, which must generally contend with extremely limited
        resources.

      ASM_CRC   (Amiga/Aztec C; many x86 systems:  DOS, OS/2, Win32, Unix)
        Use an assembler routine to calculate the CRC for each file (speed).

      ASM_INFLATECODES   (Amiga/Aztec C only, for now)
        Use an assembler version of inflate_codes() for speed.

      OLD_EXDIR
        No longer supported.

      SFX_EXDIR
        Enable the "-d <extract_dir>" option for UnZipSFX.  This is now
        enabled by default (since UnZip 5.5) to facilitate use with
        automated installation scripts and the like.  For disabling
        this feature, see the NO_SFX_EXDIR option.

      NO_SFX_EXDIR
        Disables the "-d <extract_dir>" option for UnZipSFX to generate the
        smallest possible executable stub.  (Prior to the UnZip 5.5 release,
        this was the default.)

      CHEAP_SFX_AUTORUN
        Enable a simple "run command after extraction" feature for
        the (command line) UnZipSFX stub.  This feature is currently
        incompatible with the "-d <extract_dir>" command line option,
        therefore CHEAP_SFX_AUTORUN implicitely sets the NO_SFX_EXDIR
        option.

      NO_ZIPINFO
        Compile without ZipInfo mode (-Z) enabled; makes a smaller executable
        because many text strings are left out.  Automatically enabled for
        some small-model compiles under MS-DOS and OS/2, so ordinarily there
        is no need to specify this explicitly.  (Note that even with this
        defined, the resulting executable may still be too big to extract
        some zipfiles correctly, if compiled with the small memory model.)

      USE_DEFLATE64 (default for UnZip and fUnZip)
      NO_DEFLATE64 (default for UnZipSFX stub)
        The "deflate64" algorithm from PKZIP 4.0 (or newer) is an enhanced
        variant of the deflate algorithm that achieves slightly better
        compression ratios on highly redundant data.  Normally, UnZip should
        be compiled with support for this compression algorithm enabled.
        However, this results in significantly larger memory requirements
        to run the program.  For 16-bit executables (DOS and OS/2), the
        special memory management to support the 64k history buffer results
        in a slight performance (= speed) penalty.  And for the SFX stub,
        "deflate64" support might be unnessessary as long as the Info-ZIP
        Zip utility does not support it (quite likely, this will never
        get implemented).  So, the NO_DEFLATE64 option is provided to allow
        exclusion of the deflate64 support.

      USE_BZIP2 (requires additional external code distribution)
        UnZip can optionally support the "bzip2" compression algorithm for
        most ports on 32-bit (or higher) platforms. Currently, this support
        is integrated in the Make procedures of MSDOS 32-bit (DJGPP), VMS,
        Win32, and many Unix systems.
        Prerequisites:
        You have to obtain the bzip2 source distribution (version 1.03 or
        higher) and extract it into the "bzip2" subdirectory.
        Compilation:
        - MSDOS, Win32: You have to supply the symbol definition
          "USEBZ2=1" on the command line when you invoke the "make" program.
        - Unix: The target "generic" (or "generic_gcc") automatically
          activates bzip2 support when its unix/configure script detects
          bzip2 sources in the ./bzip2 subdirectory.  See the Unix section
          below for details on how to specify the use of an existing bzip2
          kit somewhere other than in the local UnZip ./bzip2 subdirectory.
          For other targets, there are two options:
          a) Use a command like:
              make -f unix/Makefile D_USE_BZ2=-DUSE_BZIP2 L_BZ2=-lbz2 \
               LIBBZ2=bzip2/libbz2.a YourTarget
             (Do not use the continuation line and replace YourTarget with
             the appropiate target name.)
          b) Edit the Makefile and remove the comment signs from the lines
             that define the macros D_USE_BZ2, L_BZ2, and LIBBZ2 (at about
             line 84 ff.).
        - VMS: The builders should automatically activate bzip2 support when
          they detect the bzip2 files in the [.bzip2] subdirectory.  The user
          can also specify a different directory where the bzip2 source and
          object library can be found using the IZ_BZIP2 parameter/macro.
          See [.vms]INSTALL.VMS for details.

      BZIP2_SFX
        Enable bzip2 compression support in UnZipSFX (if it's enabled in
        UnZip).  By default, to reduce the size of the UnZipSFX executable,
        bzip2 compression support is disabled in UnZipSFX even when it's
        enabled in UnZip itself.

      MULT_VOLUME (experimental for 5.5x, do NOT use in production versions!)
      NO_MULT_VOLUME (default)
        The symbol MULT_VOLUME is used to flag code portions needed for
        support of multi-volume archives. For now, this flag MUST NOT be
        used to compile a production versions of UnZip. This flag has been
        introduced to allow integration of experimental code for multi-volume
        support in the master source tree. This feature will become a default
        option in the future 6.1 release of UnZip.

      LZW_CLEAN
      USE_UNSHRINK (now default, as of January 2005)
        The "shrinking" algorithm from PKZIP 1.0 is an LZW variant.  Unisys
        patented the Lempel-Ziv-Welch algorithm in 1985 and has publicly
        claimed that decompression is covered by it.  (IBM also patented the
        same thing in a filing 3 weeks prior to Unisys's.)  In 2004, the
        Unisys and IBM patents expired worldwide, so unshrinking is now
        enabled again by default.  If you do not wish to include the LZW
        method, you may still disable it by defining LZW_CLEAN.
        (Unshrinking was used by PKZIP 1.0 and 1.1, and Zip 1.0 and 1.1.
        All newer archives use only the deflation method.)

      COPYRIGHT_CLEAN   (now default)
      USE_SMITH_CODE
        The last chunk of code in UnZip that was blatantly derived from Sam
        Smith's unzip 2.0 (as in, "substantially similar") is in unreduce.c.
        Since reducing was only used by very early PKZIP beta versions (0.9x),
        support for it is now omitted by default (COPYRIGHT_CLEAN).  To in-
        clude unreducing capability, define USE_SMITH_CODE and replace the
        stub unreduce.c source file by the separatly distributed full source
        code module.  Note that this subjects UnZip to any and all restrictions
        in Smith's copyright; see the UnZip COPYING.OLD file for details.

      USE_CRYPT
        Enable decryption support for all binaries.  The default setting
        is to disable decryption support for the SFX stub to keep its size
        as small as possible. For other binaries of the UnZip distribution,
        decryption support is enabled by default.

      NO_CRYPT
        Disable decryption support for all binaries.

      PASSWD_FROM_STDIN   (with full crypt sources only; Unix, VMS only)
        Used to allow the password on encrypted files to be read from stdin
        rather than the default stderr.  This was useful for those who wished
        to automate the testing or decoding of encrypted archives (say, in a
        shell script via ``echo "password" | unzip -tq archive''), but as of
        version 5.3, UnZip has a -P option for passing a password directly to
        the program.  PASSWD_FROM_STDIN will therefore probably be phased out
        in future versions.  Note that the same security warnings given in the
        description of the -P option apply here as well.

      UNICODE_SUPPORT
        Enable restoring from UTF-8 encoded paths.  These paths are stored
        in extra fields in a backward-compatible way so that archives with
        UTF-8 paths still work on zips and unzips that don't support Unicode.
        This support follows the recent additions to the PKWare AppNote for
        Unicode support, except that Unicode comments on systems where UTF-8
        is not the current character set is not implemented in this release.

        Internally, Unicode support can be achieved by three methods:
        a) The charset encoding used by the system is already UTF-8, so
           the program just has to select the UTF-8 versions of the stored
           filenames for file name handling.
           This method is enabled by setting the symbol UTF8_MAYBE_NATIVE;
           this activates code to check for native UTF-8 encoding in the
           locale settings.
        b) The operating system and the compilation environment support
           "wide character" data in Unicode encoding (UCS-2/UTF-16 or UCS-4),
           which are used to translate between UTF-8 and the native
           extended-ASCII character encoding.
           The code for this method is activated by setting the preprocessor
           symbol UNICODE_WCHAR.
           It may be activated together with UTF8_MAYBE_NATIVE to provide
           more versatile Unicode support and additional "debugging" options
           for checking the correct recognition of non-ASCII Unicode
           characters.
        c) The operating system and the compilation environment allow use of
           unicode-encoded "wide character" data for native text strings
           support.  (This is mainly Windows NT and later.)
           Complete support for this method requires a throughout revision
           of the UnZip code to convert the MBCS 8-bit string calls used now
           to the equivalent wide character calls.  All internal string
           handling and text output needs to be ported to use wchar_t
           character storage, which for the most part requires just proper
           type updating.  This capability is planned for inclusion in
           UnZip 6.10.

        On some ports UNICODE_SUPPORT is set automatically:
        - WIN32 (and WinCE) use method b) by defining UNICODE_SUPPORT and
          UNICODE_WCHAR.
        - On Unix, the automatic configuration script enables UNICODE_WCHAR
          if ISO-10646 compatible wide characters are supported and
          UTF8_MAYBE_NATIVE if the locale detection call is available.
        For these ports, setting NO_UNICODE_SUPPORT forces deactivation of
        the Unicode support.

      NO_SETLOCALE (for Unix)
        On Unix, it is now assumed that <locale.h> and the setlocale function
        are available, to setup locale-aware filtering of displayed filenames.
        The option NO_SETLOCALE disables the dependency on <locale.h> and
        setlocale() on systems where this assumption is invalid (and the
        auto-configuring "make" target "generic" cannot be used for
        capabilities detection).

      _MBCS
      NO_MBCS
       Enable multi-byte character set support.  This is the default for the
       Human68k system (originated from Japan) and for Win32 (here only DBCS
       "double-byte character set" support).  MBCS support should also be
       enabled on systems which are capable of using UTF-8 as the native
       charset.  For MBCS support, the C runtime library must supply
       implementations for the mblen() function and the MB_CUR_MAX runtime
       macro/function.  The NO_MBCS symbol explicitely disables MBCS support
       for testing purpose, or when MBCS support does not work as expected.

      HAVE_WORKING_ISPRINT
      NO_WORKING_ISPRINT
        The symbol HAVE_WORKING_ISPRINT enables enhanced non-printable chars
        filtering for filenames in the fnfilter() function.  On some systems
        (Unix, VMS, some Win32 compilers), this setting is enabled by default.
        In cases where isprint() flags printable extended characters as
        unprintable, defining NO_WORKING_ISPRINT allows to disable the enhanced
        filtering capability in fnfilter().  (The ASCII control codes 0x01 to
        0x1f are always escaped on ASCII systems.)  If UNICODE_SUPPORT is
        enabled, the isprint() check is now done using wide characters to
        avoid MBCS issues.

      DEBUG
        Used for debugging purposes; enables Trace() statements.  Generally
        it's best to compile only one or two modules this way.

      DEBUG_TIME
        Used for debugging the timezone code in fileio.c; enables TTrace()
        statements.  This code is only used for the freshen/update options
        (-f and -u), and non-Unix compilers often get it wrong.


(4) If you regularly compile new versions of UnZip and always want the same
    non-standard options, you may wish to specify them in a LOCAL_UNZIP
    environment variable (assuming it's supported in your makefile).  Under
    MS-DOS, for example, you could add something like this to AUTOEXEC.BAT:

        set LOCAL_UNZIP=-DDOSWILD -DDATE_FORMAT=DF_DMY

    For a Bourne-like shell on a UNIX(-like) system, you could add
    something like this to "~/.profile":

        LOCAL_UNZIP='-DBZIP2_SFX' ; export LOCAL_UNZIP

    You can also use the variable to hold special compiler options (e.g.,
    -FPi87 for Microsoft C, if the x87 libraries are the only ones on your
    disk and they follow Microsoft's default naming conventions; MSC also
    supports the CL environment variable, however).


(5) Run the "make" utility on your chosen makefile:

      Unix
        For most systems it's possible to use unix/Makefile in place, at the
        possible cost of an ignorable warning; use a command like:
            make -f unix/Makefile <target>
        where "<target>" is the desired "make" target.  On most systems, the
        best target to use is "generic" or, to force the use of the GCC C
        compiler, "generic_gcc".  These targets use the unix/configure script
        to probe the compiler and other parts of the environment to adjust
        the build procedure, and to enable or disable some program features.
        Other (older) targets are less well tested, and may need considerable
        help from the user to get optimal results (or any success at all).
        To get a list of all possible system targets, use a command like:
            make -f unix/Makefile list
        Then "make -f unix/Makefile <target>" for your chosen "<target>".
        The "generic" (or "generic_gcc") target works for most systems, but
        if it fails with a message about "_ftime unresolved" or "timezone
        redefined", do "make clean", "make help", and then try either
        "make generic2" or "make generic3" as instructed.  If all else fails,
        read the makefile itself, which contains some useful comments.

        When requesting bzip2 compression support, an existing bzip2 kit can
        be used instead of dropping a bzip2 source kit into the UnZip "bzip2"
        subdirectory.  Use the "make" macro IZ_BZIP2 with the "generic" target
        to specify a directory where an existing bzip2 header file and
        suitable object/shared library may be found.  For example:
            make -f unix/Makefile IZ_BZIP2=../../bzip2/bzip-1.0.5 generic
        Frequent builders may find it convenient to create a nearby bzip2
        directory, or a nearby link to some particular bzip2 kit directory.
        For example:
            make -f unix/Makefile IZ_BZIP2=../iz_bzip2 generic
        where "../iz_bzip2" is a real bzip2 directory or a link to one.

        Similarly, use of zlib can be requested by specifying an appropriate
        zlib header+library directory using the "make" macro IZ_ZLIB.  For
        example:
             make -f unix/Makefile IZ_ZLIB=../../zlib/zlib-1.2.5 generic

        IZ_BZIP2 and IZ_ZLIB may both be specified, if desired.  Similarly,
        a value for the LOCAL_UNZIP macro can also be specified in the "make"
        command.  For example:
            make -f unix/Makefile IZ_BZIP2=../iz_bzip2 \
             LOCAL_UNZIP=-DBZIP2_SFX generic_gcc

        Use of "make" targets other than "generic" (or "generic_gcc") requires
        some care, because many other targets will not use the unix/configure
        script (or its intermediate "flags" file), and this may cause programs
        to be built without some expected features enabled.


      VMS (OpenVMS):
        On VMS, two build methods are provided: a DCL command procedure,
        and description files for MMS or MMK.  Both methods must be run
        from the main directory, not the [.VMS] subdirectory.

        A simple build using the command procedure looks like this:
             @ [.VMS]BUILD_UNZIP.COM

        A simple build using MMS or MMK looks like this:
             MMS /DESCRIP = [.VMS]DESCRIP.MMS      ! Or, with MMK, ...
             MMK /DESCRIP = [.VMS]DESCRIP.MMS

        Various options for each build method are explained in comments in
        the main builder file, either BUILD_UNZIP.COM or DESCRIP.MMS.

        Here are some more complex build examples:

        o Build with the large-file option enabled (non-VAX only):

             @ [.VMS]BUILD_UNZIP LARGE
          or:
             MMS /DESC = [.VMS] /MACRO = LARGE=1

        o Re-link the executables (small-file and large-file):

             @ [.VMS]BUILD_UNZIP LINK
             @ [.VMS]BUILD_UNZIP LARGE LINK
          or
             MMK /DESC = [.VMS] CLEAN_EXE  ! Deletes existing executables.
             MMK /DESC = [.VMS]            ! Builds new executables.
             MMK /DESC = [.VMS] /MACRO = LARGE=1 CLEAN_EXE
             MMK /DESC = [.VMS] /MACRO = LARGE=1

        o Build a large-file product from scratch, for debug, getting
          compiler listings and link maps:

             mms /desc = [.vms] clean
             mms /desc = [.vms] /macro = (DBG=1, LARGE=1. LIST=1)

        On VAX, the builders attempt to cope with the various available C
        compilers: DEC/Compaq/HP C, VAX C, or GNU C.  If DEC/Compaq/HP C is
        not available or not desired, comments in the relevant builder file
        explain the command-line options used to select a different
        compiler.

        System-architecture-specific files (like objects and executables)
        are placed in separate directories, such as [.ALPHA], [.IA64], or
        [.VAX].  Large-file products get their own directories, [.ALPHAL]
        or [.IA64L].  On VAX, VAX C products are placed in [.VAXV], GNU C
        products in [.VAXG].  Each product builder announces what the
        destination directory will be when it is run.

        Common files, such as the help libraries (UNZIP.HLP for the
        default UNIX-like command-line interface, UNZIP_CLI.HLP for the
        VMS-like command-line interface), are placed in the main
        directory.  With a mixed-architecture VMS cluster, the same main
        directory on a shared disk may may be used by all system types.
        (Using the NOHELP option with BUILD_UNZIP.COM can keep it from
        making the same help files repeatedly.)

        Some further information may be found in the files
        [.VMS]README. and [.VMS]00BINARY.VMS, though much of what's
        there is now obsolete.

      MS-DOS
        See the msdos\Contents file for notes regarding which makefile(s) to
        use with which compiler.  In summary:  pick one of msdos\makefile.*
        as appropriate, or (as noted above) use the OS/2 gccdos target for
        emx+gcc.  There is also an mscdos cross-compilation target in
        os2\makefile.os2 and a sco_dos cross-compilation target in the Unix
        makefile.  For Watcom 16-bit or 32-bit versions, see the comments in
        the OS/2 section below.

        After choosing the appropriate makefile and editing as necessary or
        desired, invoke the corresponding make utility.  Microsoft's NMAKE
        and the free dmake and GNU make utilities are generally the most
        versatile.  The makefiles in the msdos directory can be invoked in
        place ("nmake -f msdos\makefile.msc", for example).

      OS/2
        Either GNU "make", "nmake" or "dmake" may be used with the OS/2
        makefile; all are freely available on the net.  Use a command like:
            nmake -f os2\makefile.os2
        for example, to get a list of supported targets.  More generally,
        read the comments at the top of the makefile for an explanation of
        the differences between some of the same-compiler targets.

      Win32 (WinNT or Win9x)
        For creating Win32 executables, the Microsoft Visual C++ compiler
        platforms from version 2.x up to 8.0 (Visual Studio .Net C++ 2005)
        are supported.  Recent build test have been run on VC++ 6.0, 7.1
        and 8.0.  The linker of newer Microsoft Visual C++ versions (beginning
        with Visual C++ 2008 - [VC++ 9.0]) create executables that are marked
        to run on Windows 2000 and newer, only.  Although these Visual C++
        environments may succeed in building Win32 Info-ZIP executables,
        they cannot (and must not) be used to create binaries for public
        distribution.
        Alternative compilers for the Intel platforms are OpenWatcom C++,
        GNU C (preferably the mingw32 port, CygWin and emx/rsxnt may also
        work), Borland C++, or lcc-win32.
        DEC C/C++ for NT/Alpha may or may not still work.
        For the Watcom compiler, use WMAKE and win32\makefile.wat; for the
        Microsoft compilers, use NMAKE and win32\Makefile; for mingw32 and
        CygWin, GNU "make" and win32\Makefile.gcc should do the job.
        With emx+gcc, a good choice is GNUMake 3.75 (or higher) from the
        djgpp V2 distribution used on win32\Makefile.emx.

        The unzip32.dll WinDLL executables can be built using the appropiate
        Makefile in the win32\ subdirectory, or by using the Microsoft Visual
        C++ project files supplied below the windll subdirectory.  Besides the
        MSC compilers, gcc-mingw32, Watcom C and Borland C allow to build the
        Windows UnZip DLL.  By default, the Makefiles for compilers that use
        the Microsoft C runtime are configured to link against the shared
        multithreading C runtime DLL.  Depending on the intended usage for
        unzip32.dll, a statically linked dll might be more suitable.  The
        "make" scripts for MSC support build variants with static linking; you
        should look up the configuration switch DLLSTANDALONE in the MSC
        Makefile or the "Static..." build configurations in the Visual Studio
        project files.

      WinCE (WinCE or WinNT)
        Only Microsoft Visual C++ 5.0, 6.0 or Visual C++ embedded 3.0 or later
        are supported.  Use the appropiate version of the included project
        files and check wince\README for details.

      AmigaDOS
        SAS/Lattice C and Manx Aztec C are supported.  For SAS C 6.x do "smake
        -f amiga/smakefile all"; for Aztec C do "make -f amiga/makefile.azt
        all".  The Aztec C version supports assembly-language versions of two
        routines; these are enabled by default.

      Atari TOS
        Turbo C is no longer supported; use gcc and the MiNT libraries, and
        do "make".  Note that all versions of gcc prior to 2.5.8 have a bug
        affecting 68000-based machines (optimizer adds 68020 instructions).
        See atari\README for comments on using other compilers.

      Macintosh
        Metrowerks CodeWarrior Pro 4 with Universal Interfaces 3.1 is the only
        currently supported compiler, although the Mac Programmer's Workbench
        (MPW) and Think C were supported at one time and still have some hooks.
        Other Compilers may work too, no compiler specific instructions
        (pragma, header, macros, ...) were used in the code.
        For CodeWarrior Pro 4, un-BinHex the CodeWarrior project file and
        UnZip resource file (using Stuffit Expander or BinHex 4.0 or later),
        then open the project and click on the compile button.
        See ":macos:Contents" for the possible project targets.
        Link order of the standard libraries is very important: Link all
        sources first and all standard libraries last.

      Acorn (RISC OS)
        Extract the files from the archive and place in standard 'Acorn' C
        form (i.e., *.c, *.h and *.s become c.*, h.* and s.*, respectively),
        either using the UNZIP$EXTS environment variable and a pre-built UnZip
        binary, or using Spark[FS] and doing it manually.  Then copy the
        Acorn.Makefile to the main UnZip directory and either type 'amu' or
        use the desktop "make" utility.

      VM/CMS
        Unpack all the files and transfer them with ASCII -> EBCDIC conver-
        sion to an appropriate directory/minidisk/whatever, then execute
        UNZVMC to compile and link all the sources.  This may require C/370
        version 2.1 or later and certain `nucleus extensions,' although
        UnZip 5.3 has been reported to compile fine with the `ADCYCLE C/370
        v1.2 compiler.'  Note that it will abend without access to the C/370
        runtime library.  See the README.CMS file for more details.

      MVS
        Unpack all the files and transfer them to an appropriate PDS with
        ASCII -> EBCDIC conversion enabled, then edit UNZMVSC.JOB as required,
        and execute it to compile and link all the sources.  C/370 2.1 or
        later is required.  See README.MVS for further details.  [This is a
        new port and may need a little more work even to compile.]

      Human68K
        [This is a Japanese machine and OS.]  It appears that GNU "make" and
        gcc are required; presumably just do "gmake -f human68k/Makefile.gcc"
        to build everything.  This port has not been tested since the 5.12
        release.

      TOPS-20
        [No longer fully supported due to new, unported features, although
        patches are always accepted.]  Unpack all files into the current
        directory only (including those in the zipfile's tops20 directory),
        then use make.mic and "do make".

      BeOS
        You can run the BeOS makefile in place by typing "make -f
        beos/Makefile".  In fact, this is how the author tests it.

    Running the appropriate "make" utility should produce three executables on
    most systems, one for UnZip/ZipInfo, one for UnZipSFX, and one for fUnZip.
    (VMS is one prominent exception:  fUnZip makes no sense on it.  The Amiga
    produces a fourth executable called MakeSFX, which is necessary because
    Amiga self-extracting archives cannot be created by simple concatenation.
    If necessary the source amiga/makesfx.c can be compiled on other systems.)
    Read any OS-specific README files for notes on setting things up for
    normal use (especially for VMS) and for warnings about known quirks and
    bugs in various compilers (especially for MS-DOS).

    Also note that many OSes require a timezone variable to be set correctly
    (often "TZ"); Unix and VMS generally do so by default, Win95/NT do if set
    up properly, but other OSes generally do not.  See the discussion of the
    -f and -u options in the UnZip man page (or unzip.txt).  BeOS doesn't
    currently support timezone information at all, but this will probably be
    added soon.

    Then test your new UnZip on a few archives and let us know if there are
    problems (but *please* first make certain that the archives aren't actu-
    ally corrupted and that you didn't make one of the silly mistakes dis-
    cussed in the documentation).  If possible, double-check any problems
    with PKUNZIP or with a previous version of UnZip prior to reporting a
    "bug."  The zipfile itself may be damaged.



To install:
===========

Unix
  The default prefix for the installation location is /usr/local (things
  go into the bin and man/man1 subdirectories beneath the prefix), and
  the default man-page extension is "1" (corresponding to man/man1, above).
  To install as per the defaults, do "make install"; otherwise do "make
  prefix=/your/path manext=your_extension install".  (For Intel Unix flavors
  where the assembler CRC routines were used [ASM_CRC], use the install_asm
  target instead of the regular install target.)  For example, to install
  in your home directory with "l" as the man-page extension (for "local"),
  do "make prefix=$HOME manext=l install".  Permissions will be 755 for the
  executables and 644 for the man pages.  In general root must perform in-
  stallation into a public directory.  Do "rehash" if your shell requires
  it in order to find the new executables.

VMS
  To complete the installation, the executables may be left in place,
  or moved (or copied) to a convenient place.  While other methods
  (like DCL$PATH) exist, most users define symbols to make the UnZip
  executables available as foreign commands.  These symbol definitions
  may be placed in a user's SYS$LOGIN:LOGIN.COM, or in a more central
  location, like SYS$MANAGER:SYLOGIN.COM.  Typical symbol definitions
  might look like these:

     UNZIP :== $ dev:[dir]UNZIP.EXE             ! UNIX-like command line.
  or:
     UNZIP :== $ dev:[dir]UNZIP_CLI.EXE         ! VMS-like command line.

  For convenience, a ZIPINFO symbol could also be defined, so:

     ZIPINFO :== $ dev:[dir]UNZIP.EXE """-Z"""

  On a non-VAX system, different symbols could be defined for the
  small-file and large-file programs.  For example:

     UNZIPS  :== $ dev:[dir.ALPHA]UNZIP.EXE     ! UNZIPS = small-file UnZip.
     UNZIP*L :== $ dev:[dir.ALPHAL]UNZIP.EXE    ! UNZIP[L] = large-file UnZip.

  The builders create help text files, UNZIP.HLP and UNZIP_CLI.HLP.
  These may be incorporated into an existing help library, or a separate
  UnZip help library may be created using commands like these, using
  either UNZIP.HLP (as shown) or UNZIP_CLI.HLP:

      $ LIBRARY /HELP dev:[dir]existing_library.HLB UNZIP.HLP

      $ LIBRARY /CREATE /HELP UNZIP.HLB UNZIP.HLP

  UnZip help may then be accessed from a separate UnZip help library
  using a command like:

          $ HELP /LIBRARY = device:[directory]UNZIP.HLB

  For greater ease, the user (or system manager) may define a
  HLP$LIBRARY logical name to allow the HELP utility to find the UnZip
  help library automatically.  See HELP HELP /USERLIBRARY for more
  details.   The command procedure HLP_LIB_NEXT.COM may be used to
  determine the next available HLP$LIBRARY logical name, and could be
  adapted to define a HLP$LIBRARY logical name for an UnZip help library.

  The kit includes MAKESFX.COM, a command procedure intended to simplify
  creating a self-extracting archive.  It may be helpful to install this
  procedure near the UnZip executables.  MAKESFX.COM expects another
  symbol definition, like one of these:

     UNZIPSFX :== $ dev:[dir]UNZIPSFX.EXE       ! UNIX-like command line.
  or:
     UNZIPSFX :== $ dev:[dir]UNZIPSFX_CLI.EXE   ! VMS-like command line.

  Again here, on a non-VAX system, either a small-file or a large-file
  UNZIPSFX program may be used.  (MAKESFX.COM could be modified to allow
  a run-time choice to be made.)

OS/2, MS-DOS, NT, Atari, Amiga
  Move or copy unzip.exe (or unzip.ttp, or UnZip, or whatever) to a direc-
  tory in your path; also possibly copy the UnZip executable to zipinfo.exe
  (or ii.exe), or else create an alias or a batch/command file for ZipInfo
  ("@unzip -Z %1 %2 %3 %4 %5 %6 %7 %8 %9" under MS-DOS).  The latter is only
  relevant if NO_ZIPINFO was *not* defined, obviously...  Under djgpp 2.x,
  zipinfo.exe is a 2K stub symbolically linked to unzip.exe.

Acorn RISC OS
  Copy the executables unzip, funzip and zipinfo to somewhere in your
  Run$Path.  See your Welcome manual if you don't know about Run$Path.

BeOS
  The default prefix for the installation location is /boot/usr/local
  (things go into the bin and man/man1 subdirectories beneath the prefix),
  and the default man-page extension is "1" (corresponding to the man/man1,
  above).  Of course, these Unix man-pages aren't useful until someone ports
  something that can format them... plain text versions are also installed
  with an extension of ".txt".  To install, do a "make install", or to
  change the prefix, do "make prefix=/your/path install".  For example, to
  install in /boot/bin, do "make prefix=/boot/bin install".

Macintosh
  (This port is for Macintosh OS before Mac OS X.  See Unix Apple below for
  Mac OS X and later.)
  MacZip requires at least System 7 and a Macintosh with a minimum of a
  Motorola 68020 or PowerPC 601 processor. Other configurations may work
  but it is not tested at all.
  The application (MacZip) is distributed as a combination of zip and unzip
  in one program. The offical release is a fat binary with both regular 68K
  and native PowerPC versions included.
  Move the executable(s) somewhere--for example, drag it (or them) to your
  Applications folder.  For easy access, make an alias in the Launcher Control
  Panel or directly on your desktop.
  This port supports also Apple-event.So you can install it in your
  WWW-Browser as a helper-app.
  Look into "macos/README.TXT" (or ":macos:README.TXT" on Mac) for further
  info.

Macintosh OS X (Unix Apple)
  Mac OS X and later are based on BSD Unix and are supported by the Unix
  port.  See the Unix port for details.  Though support is currently
  minimal, we plan to support additional Mac OS X features, such as resource
  forks, in future releases.

MVS, VM/CMS, z/OS
  More information may be coming soon.

Human68K, TOPS-20, AOS/VS, etc.
  Dunno, sorry...

